Smart Campaigns

Smart Campaigns is a tool for sending out one-shot-campaigns, such as a monthly newsletter. In Smart Campaigns, you can send messages via all channels: email, print, fax, Mobile PushCampaign to submit a push message to mobile devices., and SMS.

Use Smart Campaigns to create, start, monitor and evaluate regular campaigns. You create and edit these campaigns on a graphic desktop, and access the elementsOne component of a campaign. As examples, recipients and email are elements. Nodes are used to transfer elements through the sequence of actions that occur when a campaign is activated. that make up a campaign (recipients, target groupsSubset of recipients defined by rules and conditions and a logic relationship between them. For example, all recipients in the United Kingdom., A/B testA/B testing lets you create variations for a number of page elements (blocks, images, content, buttons, form fields, and so on), or two variants (A and B) of an email, and then compare which variation performs best. and the message) from the tool list in the left panel.

To work with Smart Campaigns, go to start menuMain screen in Episerver Campaign, where the available options are grouped together. > CampaignsSmart Campaigns.

Image: Smart Campaign overview

A list of Smart Campaigns appears in the top half of the window. The Status column shows whether a campaign was activated or sent. The lower half of the screen displays the selected campaign.

Because a Smart Campaign's elements and parameters are displayed visually, you can easily control and optimize it. After you activate a campaign, the Smart Campaigns working area displays feedback on it.

Campaigns and messages

Every Smart Campaign must have at least one message. Both campaigns and messages appear in the Campaign Overview in the Smart Campaigns window. A message begins with three dots (...) and is located below its campaign. The following conditions and relationships apply:

Campaign type

You can select from the following campaign types, each of which is sent via different channels. A Smart Campaign's recipient list must be compatible with its delivery channel.

  • Email. Sends email to recipient of type Email or a multiple list.
  • Print. Sends message to recipient of type Print or a multiple list via post (letter or postcard).
  • Fax. Sends fax message to recipient type Fax or a multiple list.
  • SMS. Sends SMS message to recipient of type SMS or a multiple list.
  • Mobile Push. Sends push notification to the Android or iOS device to a recipient of type Push or a multiple list.

Campaign status


Use the buttons below the campaign overview to perform these actions:

Some actions are not available for incomplete or sent campaigns.


Creates a new campaign. See Creating and editing a campaign.


  1. Click on a campaign in the list.
  2. Click Copy.

Use Copy if you regularly send similar campaigns. You can quickly make minor adjustments to values in the copied campaign. Campaign elements (recipients, target groups, messages, and so on) are applied.


  • Individual messages in the list cannot be copied.
  • Messages are not stand-alone; they belong to a campaign.
  • You can reuse messages by selecting a message in the Selecting the type of content step.

To migrate Mailings Classic mailings to Smart Campaigns, see Mailings Classic.


To edit a campaign:

  1. Click on a campaign in the list.
  2. Click Edit.

See also Creating and editing a campaign.

To edit a message:

  1. Click on a message in the list.
  2. Click Edit.


  • Sent campaigns cannot be edited.
  • Individual messages cannot be copied.
  • Messages belong to a campaign.


To delete a campaign:

  1. Click on a campaign in the list.
  2. Click Delete.

To delete a message:

  1. Click the campaign to which the message belongs.
  2. Click Edit.
  3. Hover over the message node and click Episerver image.

Image: Deleting a message in Smart Campaigns


  • Sent campaigns cannot be deleted.
  • Individual messages cannot be deleted.
  • Messages belong to a campaign.


After a campaign is completely defined, its status changes to Activation required, and the Activate button appears.

Before you can start a campaign, you first need to activate it.

  1. Select the campaign and click Activate.

    After you activate a campaign, messages linked to a Wait node are automatically started at the specified time.

  2. Click Activate campaign in the dialog box. The button changes to Start.

    When activated, the campaign is validated along with parameters (recipients, target groups, message).

  3. Click Start to begin sending a campaign's messages with the specified parameters (target groups, reductions in sending speed, and so on).
    • You can activate campaigns only, not messages.
    • Incomplete campaigns cannot be activated or started.
    • You can start either a campaign or its associated messages.

A/B tests on starting/activating a campaign

If a campaign includes an A/B test, you will be able to start the splits for this campaign individually.

If you have selected the Start optimization manually option in the A/B test, then select all campaign splits after the campaign has been sent, and then click Optimize to send the optimized message to the rest of the distribution list.

Copy to client

Contact customer support to activate this feature.

Copy campaigns to other clients. Recipient lists and target groups are not transferred to the target client.


  • The registered user must have permission to create mailings in the target client.
  • The target clients must have the template used in the campaign that you want to copy.
  1. In the Campaign Overview, select the campaign and click Copy to client. The Copy campaign to client window opens.
  2. In the New campaign name in the target client field, enter the name for the copy of the campaign in the target client.
  3. In the Target clients area, select the client to which you want to copy the campaign.

    To select all available target clients, check the box in the menu bar.

  4. Click Copy.


To display the dispatch performance or to display various previews, perform these steps.

  1. In the Campaign Overview, click a campaign then Analysis. The Campaign analysis window opens.
  2. Click Start new analysis. At the top right, a summary of the campaign is displayed. Additionally, the number of recipients is displayed for each individual node.
  3. To view the order reference for a print message, in the message node, under DPAG order reference, click Details. See Viewing the DPAG order reference.
  4. To view the Send time optimization overview (additional feature), click the corresponding Wait node or A/B test node.
  5. To preview the message, click the corresponding message node. A preview opens to the right.

    In print messages, if you did not connect the message node with the Recipients node, the personalized recipient data (that was added through a field function) is not displayed.

The following options are available in the preview:

  • Episerver image. Displays available subject lines.
  • Target groups. When active, select one or more target groups and click Submit selection to display only the paragraphs assigned to the selected target groups.
  • Episerver image and Episerver image. The buttons only become active when you use a target group in at least one paragraph.
    • Click Episerver image to show the respective assigned target groups in the individual paragraphs.
    • Click Episerver image to deactivate the display of assigned target groups.

    Image: Target groups display activated

    If you do not want to enable or disable the display of target groups, but rather just the display of a single target group, click the relevant paragraph Episerver image.

  • Container paragraph. Paragraphs that contain several sub-paragraphs with their own target groups are marked in the content preview as container paragraphs. Container paragraphs are highlighted with a yellow border.

    Image: Container paragraph

  • The target groups applied in container paragraphs are automatically carried over to sub-paragraphs included. If you hide target groups in container paragraphs using the button target groups, not only is the container paragraph hidden, but also the sub-paragraphs it contains.

    Paragraphs that contain several sub-paragraphs without their own target groups are not marked as container paragraphs or highlighted in yellow, but instead are displayed with a simple gray banner. However, the target groups for these paragraphs are also carried over to sub-paragraphs.

  • Recipient selection for personalized view. To display a personalized preview with the data of a specific recipient, in the left column, select a recipient list. Then, in the right column, select the recipient.

    Image: Recipient selection for personalized view

  • Change view. The tab bar on the upper left border includes the HTML, mobile and text message previews. In the HTML preview, the mailing appears as it will later appear in the recipients’ inboxes. Under the Mobile tab, you can view the message as it appears on mobile devices. The Text tab displays the automatically-generated text version of the mailing.
  • Save result as image or Save result as PDF. Click to save the content template as an image or PDF (only for Print campaigns).